• Contact Us
  • Shop Online
  • Donate

The American Supply Association is committed to giving its members of the PHCP / PVF industry the ability to adapt, grow & succeed.

Join ASA

The American Supply Association is committed to giving its members of the PHCP / PVF industry the ability to adapt, grow & succeed.

Join ASA

Upcoming Events

cbeeter@asa.net
/ Categories: News

ASA Members Share Employee Training Best Practices During Roundtable Sessions

Part of the value of being an ASA member is the incredible networking opportunities afforded to members through ASA events. At the 2023 Trainer’s Forum last month, learning and development professionals came together to crowdsource some ways to tackle the most common challenges they face in their day-to-day work. What follows are some of the best ways our members have identified to tackle these common challenges.

 

Challenge No. 1: Leadership Buy-In

One area that perpetually creates difficulty for L&D professionals is gaining the buy-in of leadership. Whether this means financial buy-in for training functions, or just the case for training in and of itself, this is not a new challenge for trainers. Although the statistics back up the very real consequences of training (or not), it can be harder to paint the picture for upper-level stakeholders. That said, data shows companies that invest $1,500 per employee per year in training yield an average of 24% higher profit margins!

 

Many attendees commented on the tangible cost of recruitment/rehiring; hiring and training an employee is typically more than $5,000, not including benefits. The relationship between training and retention is strong – companies that invest in training and development have 37% higher employee retention rates, data shows. When framed in dollars and cents to hire and rehire talent, the cost of training pales in comparison to the cost of restaffing every six months.

 

Attendees were bold with some of their proposed solutions. One attendee commented succinctly – “just do it” – build credibility by finding a solution and presenting a path forward to leadership. Among laughter in the room, many attendees acknowledge that asking for forgiveness instead of permission can be risky, but also can have big payoffs.

Instead of bringing a problem to leadership and asking what you should do about it, take the time to create a path forward attuned to your vision, and present that solution to your leadership. You may still not get the green light, but by taking the situation in hand and creating a pathway forward, it’s a lot more likely you’ll be able to develop your path forward.

 

The group also noted that creating relationships with upper-level stakeholders can be valuable, as well as individuals who may have wider spheres of influence than your own. Attendees encouraged each other to be brave with their ideas and share them far and wide. Gain allies where you find them and ask for help in your quest to shift the mindset of leadership about training.

 

Challenge No. 2: Limited Budgetary Resources
Limited funding to support training activities can often be a stumbling block for our members. Many times, the training budget can be the low-hanging fruit for budget trimming, leaving L&D professionals to use creative ways to leverage resources that are easy on the pocketbook.

 

To get around these challenges, many members reported on their use of free web-based resources. In 2023, most savvy software vendors will provide a free version of their paid software. Although this might be missing all the bells and whistles, typically the free-access level provides enough leeway to accomplish the task at hand. Attendees especially loved Canva, a free-to-use, rapid authoring tool to create engaging and exciting imagery.

 

L&D professionals in the room also commented on the ability to leverage social learning. As silly as it may seem to those in the later stages of their career, resources such as TikTok, YouTube, or social media influencers can also be a credible source for free content (along with some levity!). Several attendees had “work TikTok’ers” they followed and would push out content to their employees via this social platform.

 

Many also agreed that training need not be fancy to get the job done – the tried-and-true PowerPoint software that comes preloaded onto your laptop can absolutely be a vehicle for information transfer. Over the years, various plug-ins (such as Camtasia, a free video editor) have made PowerPoint much more powerful than a simple slide creator. With a simple microphone and a laptop, you can create detailed voiceovers and narration. Fancy can be fun – but often isn’t required to get the job done.

 

Challenge No. 3: Creating Meaningful Career Pathing
Throughout this discussion, attendees hit on a few key strategies for developing internal growth pathways for their trainees. Knowing the importance of career development in retention of talented workers, our members are always looking for ways to secure the future pipeline of talent at their organization.

 

Many members detail specific career pathways within the business, such as what the path might look like for a warehouse worker who wishes to become a counter salesperson. Attendees highlighted the need to have clear, defined job descriptions, and if one doesn’t already exist, a job description should be drawn up specifically for that role.

 

By using the job description as a guiding beacon, managers can clearly spell out the skills, behaviors and requirements needed for an employee to advance their career. Transparency is key; employees want to know what the future holds for them. By creating unique promotional and career pathways, the employee understands what is required to get them to the next level and understands the process. Without this transparency, it can be easy to misconstrue lack of career progression as favoritism or lack of interest in seeing employees grow.

 

This approach also creates a sense of loyalty, attendees reported. When the company invests in their people by providing training and growth opportunities, the employee feels valued, and that their organization is helping them achieve their career goals. An employee that feels valued and likes their future can be visualized within the organization is much more likely to reinvest in the business in the form of dedicated labor.

 

ASA University is committed to providing resources to all members to help recruit, train, and retain a quality workforce at their organization. To learn more about how ASA can help you achieve your training goals, contact us at education@asa.net.

Print
430 Rate this article:
No rating
View Full Calendar

ASA News

Introducing ASA’s Service Provider Webpage!

ASA is excited to have the support of a wide array of service providers tailored to support our members in their daily operations. These resources deliver timely assistance and...
More News

ASA Commodities Feed

ASA Member Comment on February Trends: "· Tariffs were questionable, but it looks like they are getting worked out. Some manufactures unaffected by the tariffs are using them as an excuse for a price increase. Will they stick, is now the question?"

HRC Steel Update from @MarketWatch: $700.00, -7.00, -0.99% @ASA_HQ #commodities #HotRolledCoil

Nickel Price Update: January 14th, 2025, the price of nickel is $7.2053 per pound. @ASA_HQ #commodites #Tuesday

COPPER UPDATE from @Nasdaq: Todays High/Low - $27.33/$26.99, 52 Week High/Low - $31.63/$22.81, Share Volume - 69,643 @ASA_HQ #copper #Friday

Commodity Update from @OilandEnergy

Oil: $74.53, +0.77%

BRENT: $77.05, +0.71%

NAT GAS: $3.598, +0.24% #Monday #PVF

@ASA_HQ

"We are optimistic heading into 2025 because a lot of decent jobs opened up in fourth-quarter 2024 and will be strong through first three quarters of 2025. Both industrial and infrastructure work are keeping us busy, and as we expand our footprint, we expect to be much...

Member comments: “Copper Comex has been stable so far in December. Copper demand has gone up.” #Commodities @ASA_HQ

Morgan Stanley has its 2025 copper price forecast at $9,500/MT. Capital Economics is predicting $9,000/MT in 2025 and $8,000/MT in 2026. #Commodities @ASA_HQ

From an ASA Member: "We are optimistic heading into 2025 because a lot of decent jobs opened up in fourth-quarter 2024 and will be strong through first three quarters of 2025. Both industrial and infrastructure work are keeping us busy, and as we expand our footprint, we...

High-pressure forged steel fittings and branch connections have had no price increase announcements throughout the fourth quarter. Carbon and stainless-steel bars remain readily available. #Commodities @ASA_HQ

Gasoline prices are expected to average $3.31 a gallon in 2024 and $3.19 in 2025 (versus $3.52 average in 2023). #Commodities @ASA_HQ

The price of copper slipped again over the past 30 days and was lower at $4.04/lb. ($4.34/lb. last month). This is 6.9% lower in the past 30 days. #Commodities @ASA_HQ

Crude oil prices are expected to average $77.00 a barrel in 2024 ($78.80 in the last update and they were $77.58 in 2023) according to the EIA. For 2025, prices are expected to average $71.60. #Commodities

After a tough September, sales declined by 7.6% compared to August, October increased 13.6% vs. September 6.8%. Year-to-date sales edged up with respondents reporting a median increase of 1% and Trailing Twelve Month sales increased 1.7%.

ASA Member Comment: "After a few big projects were put on hold earlier in the year, they seem to be bubbling up again. We’re getting current numbers together and feel they’ll start moving again by the 2nd quarter of 2025." @ASA_HQ #Friday

Copper in 2025: Expected to see a global supply deficit of roughly 848,000 metric tons driven by China’s electric vehicle sector, data center buildouts, demand for electricity and infrastructure buildout focus around the world & general electrification of the global...

West Texas Intermediate (WTI) was essentially unchanged at the time of writing at $69.46 ($69.83 a barrel in last month’s report and flat at just 0.8% year-to-date). It was 8.4% lower vs. October of 2023. #Friday @ASA_HQ

Producer Prices for steel pipe and tube were down marginally in the latest data from the end of September (latest available). They were down again by 1.3% month-over-month (also down 1.3% last month). Year-over-year, the PPI was 6.1% lower (also -6.5% Y/Y in the last update)...
Copper/Plastics Update: The Comex closed Monday, Oct. 28 at $4.332 which is DOWN $0.0075 from Friday’s close. The Comex average year-to-date price is at $4.2348 per pound and the LME is $0.0752 below the Comex average year to date price. Plastics pricing is relatively...

ASA Member Comment: "Currently business is flat. With the conferences that I have attended it seems as though everyone is hoping for things to pick up after the election." #Commodities @ASA_HQ

COPPER UPDATE from @Nasdaq: Priced at $4.3365, Prior Settlement: $4.3805, 52 Week High: $5.106, 52 Week Low: $3.5845 @ASA_HQ #copper #Thursday

From a member: “Sales in October have increased over 2024 and previous months. There is political instability but that does not seem to affect the current market. Competition is aggressive in the Northeast, margins have eroded slightly. We are very optimistic...

HRC Steel Update from @MarketWatch: $708.00, +3.00, +0.43% @ASA_HQ #commodities #HotRolledCoil

Nickel Price Update: October 14th, 2024, the price of nickel is $8.0204 per pound.

@ASA_HQ #commodites #Tuesday

Commodity Update from @OilandEnergy

Oil: $73.99, +0.75%

BRENT: $77.41, +0.83%

NAT GAS: $2.623, -0.037% #Thursday #PVF

@ASA_HQ

From an ASA member: “Our same-store sales are up 11% vs. the first four months of 2023. I’d love to tell you it’s due to “brilliant” management😊, but it is primarily due to an uptick in project work in the power and air separation...

The stainless weld fitting market continues to stay mostly flat on pricing, but there are continued signs that metals are rising, which could cause prices to start moving. @ASA_HQ #Commodities #Monday

Stainless steel pipe and fittings prices had remained under consistent, downward pressure since the end of 2022. The major reason was the precipitous fall of nickel prices following the astonishing runup of LME nickel prices during the first half of 2022.

STEEL MARKET UPDATE: Flat-roll producers are more willing to negotiate on pricing than in the recent past. Specifically, the increased proliferation of import steel pipe in the market has contributed to suppressing prices this year. @ASA_HQ #Tuesday #Commodities

Carbon Steel Update: After a brief producer-initiated spike to welcome the start of April, hot-rolled coil prices have largely settled back into a lower station. Officially, HRC is trading 12% down from the start of April. @ASA_HQ #Commodities #Monday

Copper Update: Copper continues to go up in price. Not sure where it will stop. 12% up so far this year. @ASA_HQ #commodities

Stainless steel pipe and fittings prices had remained under consistent, downward pressure since the end of 2022. The major reason was the precipitous fall of nickel prices following the astonishing runup of LME (Class I) nickel prices during the first half of 2022.

COPPER UPDATE from @Nasdaq: Priced at $4.4865, Prior Settlement: $4.46, 52 Week High: $4.526, 52 Week Low: $3.552 @ASA_HQ #copper #Thursday

Nickel Price Update: April 19, 2024, the price of nickel is $8.8308 per pound. @ASA_HQ #commodites #Wednesday

HRC Steel Update from @MarketWatch: $812.00, +5.00, +0.62% @ASA_HQ #commodities #HotRolledCoil

Commodity Update from @OilandEnergy

Oil: $82.88, -0.26%

BRENT: $86.68, -0.61%

NAT GAS: $1.779, +0.027% #Monday #PVF

@ASA_HQ

Carbon steel futures are down 3% this month and 30% year-to-date. International markets are seeing more stress than domestic, as historically high interest rates in Europe have put massive pressure on inventories.

The Federal Reserve is still maintaining current rates but was still signaling two to three rate cuts in 2024, all being a quarter-point. The first cuts are expected to begin in June but could come earlier. #Commodities

The current GDPNowcast from the Atlanta Fed has started to decelerate from earlier forecasts in Q1 but is still showing the economy growing at 2.1% (2.9% in last month’s report and Blue-Chip forecasters are now expecting growth of 2.0% as well in the quarter).

Commodity Update from @OilandEnergy

Oil: $82.07, +0.12%

BRENT: $86.78, +0.03%

NAT GAS: $1.610, -0.005% #Tuesday #PVF

@ASA_HQ

"Quote activity has increased as well as larger projects breaking ground. The first quarter was slow to start but we see positive gains moving forward. Sales for March are flat compared to a very good month in 2023 but margin is up slightly." @ASA_HQ

COPPER UPDATE from @Nasdaq : Priced at $4.0745, Prior Settlement: $4.13, 52 Week High: $4.13, 52 Week Low: $3.552 @ASA_HQ #copper #Wednesday  
Nickel Price Update: As of March 15th, the price of Nickel per Lb: $8.1159 @ASA_HQ #commodites #Tuesday

The EIA is forecasting gasoline prices to average $3.31 in 2024 after averaging $3.52 last year. Diesel forecasts show an annual price of $3.92 after averaging $4.21 last year. #Commodities @ASA_HQ

HRC Steel Update from @MarketWatch: $789.00, -4.00, -0.50% @ASA_HQ #commodities #HotRolledCoil

Commodity Update from @OilandEnergy

Oil: $81.20, +1.48%

BRENT: $85.28, +1.25%

NAT GAS: $1.683, +0.025% #Thursday #PVF

@ASA_HQ

Economy: First-quarter GDP is once again stronger than expected on the back of strong consumer spending, government investment and stable corporate spending (nonresidential construction). @ASA_HQ #Commodities

The Federal Reserve is still signaling two rate cuts in 2024, both being a quarter-point. As we approach the presidential election, the Fed likely will be unwilling to change rate policy. #Commodities @ASA_HQ

Domestic Malleable Iron Update: An industry-wide price increase of 6% went into effect Jan. 1 with labor and energy being the primary cost-increase drivers. #Commodites #Monday @ASA_HQ

Entering 2024, the industry as a whole anticipates a continued return to pre-pandemic stability across the board. Resin suppliers based in the Gulf Coast were able to dodge a repeat catastrophe by closing vulnerable processes during a recent cold snap. These measures resulted...

Careers

We are a vast, sophisticated and technology-driven sector of our economy. Why do we call it the "Supply Industry"? Because we make, sell, and supply products that every American uses every day.

98% of ASA Members View Being a Member of ASA Valuable to their Business

*Based on the 2022 ASA Member Satisfaction Survey

#ASA

Our Partners

AO Smith
LIXIL
State Water Heaters
Bradford White Water Heaters
Kohler
American Water Heaters
insinkerator
Milwaukee Valve
NIBCO
Bradley Watts 1
Bradley Watts 2
Zurn
ASA Education Foundation
AB&I
Apollo Valves
ASC Engineered Solutions
Charlotte Pipe
DELTA
Gerber
 
Jomar
Oatey
SharkBite
Rheem
RUUD
Tyler Pipe
Viega
Zoeller
American Granby
Ariston Group
Blue Ridge
BrassCraft
Canals
Epicor
Everflow
Fluidmaster
Jones Stephens
GE Appliances Air & Water Solutions
Infor
Legend
Liberty Pumps
Lochinvar
McGuire
Merit Brass
Milwaukee
Moen
MUELLER STREAMLINE
Jay R. Smith
Niagara
Rinnai
Sioux Chief
SLOAN
TOTO
uponor
Victaulic
WIPFLI
AIM/R
ATS
Billco
Braxton Harris
Diablo
Distro
ECCO
inriver
IPS Corporation
ITA Group
LBMX
Matco-Norca
MIFAB
MSI
Phoenix
Prier
RectorSeal
T & S Brass and Bronze Works
Trimble
Unilog/Bravo
AH Deveney
AMI Associated Marketing
BDA & Associates
Big Rivers Marketing
Bongard Corporation
Burke Agency
BWA South
Carr Company
Central Sales
Champions Marketing
Cooper New England
Davenport
Dellon Sales
EDOS
Evergreen
Fourmation Sales
Harry Warren
Hart Travers & Associates
HBA
Hodes Sutter
HSA
Jim Bryce & Associates
Keystone Sales & Associates
Libb Company
Lowder Sales Inc
M&H Sales
Maloney & Curcio, Inc.
Marsh & Moore
Martin & Smith
Michel Sales
Midwest Sales
Osborne
Paramount
Pepco Sales & Marketing
Pinnacle Sales
PIR Sales, Inc.
Platsky
PM Associates
PMI Sales & Marketing
Preferred Sales
Proline Sales
Repcor
RKR
Schu
Signature Sales, Inc.
Snider
Southwest Sales
Spirit Group
Synergy Sales
The Joyce Agency
Tim Morales & Associates
Walter Morris
WHB
Yates
Zurier

Recommended Association Partners for ASA member companies.

Federated Insurance
repfabric